Notes for the use of the press
Release time:
2021-11-12 11:03
Notes for the use of the press
(1) Check the lubrication of each part, and make the lubrication electricity fully lubrication
(2) Check whether the mold installation is correct and reliable;
(3) Check whether the compressed air pressure is within the specified range
(4) Check whether the switch buttons are sensitive and reliable, and must remove the flywheel and clutch before opening the motor; CNC tower punch
(5) Make the press make several empty trips, check the work of the brake, clutch and control part
(6) Check the main motor for any abnormal heating, abnormal vibration, abnormal sound, etc
(7) Add lithium ester oil to the slide with a manual oil pump
(8) Check and adjust the feeder roller clearance to the process requirements
(9) Check and keep the oil quantity of the oil mist device to meet the specified requirements
(10) When the motor starts, check whether the rotation direction of the flywheel is the same as the rotary mark.
previous page
next page
previous page
next page
Related news
Dalian GeruiElectromechanical Equipment Installation and Maintenance Co., Ltd
©2022 Dalian Gerui mechanical
SEO | Powered by ： www.300.cn Dalian
CONTACT INFORMATION
Add：10-10-3, phase II, huashengda Industrial Park, northeast Qijie, Dalian Development Zone
